顯示 269 筆結果中的 17–32 筆View All
Writing desk with structure in solid walnut canaletto wood. The lower top and the front of the drawer are covered in leather. The upper top is available in leather or in gold Calacatta, Portoro or Zebrino marble. It is available in two versions: with the storage upper section or with an adjustable round mirror, both covered in leather in two different colours. The tips are in metal painted in a bronze colour.
Executive desk with the frame in walnut canaletto wood veneer.The tops are available in the following versions:
- ebony macassar veneer fin.34 (with or without cable holder and adaptor);
- in various shades of saddle leather (with or without cable holder and adaptor);
The adaptor, placed in the top, is predisposed for 3 schuko sockets, or 3 UK sockets, or 3 USA sockets + 2 RJ45. On both sides of the top, there are two standard, extractable drawers so that the desk may be used either on the right or on the left side; the base of the drawers is either in natural saddle leather for the versions with the top in ebony or in saddle leather as that for the top.
The chest with 3 drawers, two shallow and one deep, is in curved multi-layer, veneered national walnut. Each drawer has an independent opening system that can rotate 360° thanks to Arnite spacers, inserted along the metal rod. In the standard version, a special system on the inside of the chest of drawers allows the drawers to open in one direction. The chest of drawer is equipped with two standard mechanical locks for right or left fastening. The knobs are in walnut canaletto wood with details in satinfinished nickel metal. The base of the chest of drawers, and the tip of the leg are in satin-finished nickel metal.
- for the drawers under the top: internal separator in walnut with finish matching
- with the frame; a pen holder with the dark brown flock application is included;
- for the drawers under the top: internal sliding top in natural saddle leather for
- the versions with the top in ebony or in saddle leather as that for the top;
- a modesty panel in curved multi-layer, veneered canaletto walnut with the
finish matching with the frame. The panel is hinged for opening and closing and it is fixed to the structure of the chest of drawers, which has been already predisposed for right or left-hand mounting. A runner has been placed on the base of the panel to facilitate movement.
Note: it is necessary to specify the right or left-hand mounting of the modesty panel, when the order is submitted.
Desk with natural polished solid maple or walnut canaletto wood structure. The drawer, in various shades of saddle leather, has a metal insert. The leg tips are in brushed nickel metal. The completely removable covering is available in various shades of saddle leather.
A series of square and oval tables with structure in solid ash wood available in five finishes: natural (fin.96), anthracite grey (fin.93), ash grey (fin.68), walnut painted (fin.2N) and dark painted (fin.67). The inserts of the irregular top are available in:
- - gold Calacatta, Portoro, Zebrino or Velvet Brown marble;
- - metal sheet Peltrox finish;
- - walnut canaletto wood available in the following finishes: natural (fin.11),
- grey (fin.2W) and dark (2Z);
- - leather in various shades of colour, as per the catalogue;
- - crystal glass in glacé, pearl grey, dusty grey, silk grey colours.
A series of rectangular tables with frame in aluminum and protected stainless steel, powder lacquered in carob colour. The leg inserts are in ash wood available in sand finish (fin.3F) and the top is made up of inserts in brushed grigio oriente marble.
Ash wood and marble are natural materials that stand out in their original veining, sometimes even not uniform. The imperfections of the raw material should not be considered as a defect, but rather a quality of the material.
Apsara Low Table
Round, square and rectangular coffee tables, with top in Peltrox or grigio oriente marble.
Small armchair and low small armchair with frame in ash wood available in sand finish (fin.3F) and protected aluminium, powder painted in carob colour. The seat and the back are in EVA, waterproof polymer, available in the following colours: white, sand, dark brown, brick red, bally blue, grey. The seat and backrest cushions are in expanded polyurethane and fibre for outdoor with waterproof cover. The upholstery with fabrics of the Open-air collection is completely removable.
The ash wood is a natural material, whose original veining, sometimes even not uniform, stand out. The imperfections of the raw material should not be considered a defect, but rather a quality of the material.
A series of modular sofas, armchair, chaise longue and stool available in three dimensions of width, with the frame in poplar plywood and painted metal available in two finishes: bronze colour with natural effect (fin.48) or black nickel colour (fin.5A). The frame can be covered with fabric, leather or saddle leather, completely removable.
To complete the elements with the armrest, it is necessary to choose from the following accessories:
- - right or left low table available in walnut canaletto wood, saddle leather or
- marble as follows: gold calacatta, Portoro, zebrino or Velvet Brown;
- - covering available in fabric, leather or saddle leather;
- - covering with pockets available in leather or saddle leather;
- - storage box in saddle leather.
The padding is in goose feathers with inserts in flexible multi-density polyurethane. The completely removable upholstery is in fabric or leather.
Cushions in feathe, fabric or leather removable upholstery: cm 63 x 42 e cm 52 x 50.
Small armchair in solid walnut canaletto wood. The seat and the back are in expanded polyurethane, covered with fibre, and the upholstery in fabric or leather is not removable. The tips are in metal painted in a bronze colour.
A series of armchairs in solid beech wood with polished or lacquered legs. The armrests are in polished pau ferro. The padding of the seat and of the back is in non-deformable multi-density polyurethane and fibre. The upholstery is available in three versions:
- - Kamet removable cashmere-wool with studs enhanced by cabochon details. Proposed in two colours with the white interior and the exterior available in: taupe with carnelian cabochon, nude with white cabochon and blue denim with lapis cabochon.
- - Katori sheepskin proposed in an upholstery composed of three different fur versions, available in white, nude or blue;
- - Twist nude leather finely weaved, paired to sand saddle leather for the external and the armrest.
The covers of the Progetti Fashion armchairs are handcrafted. The imperfections of the materials are to be considered a natural characteristic of the product.
“Wing chair with the structure of the swivel base in metal painted in a bronze color covered with walnut canaletto wood. The padding of the seat and back, in birch plywood and profiled steel, is in flexible multi-density polyurethane covered with fibre. A headrest cushion is included. The upholstery in fabric or leather is completely removable, with a leather piping available in various color shades.
Stool with the swivel base in metal painted in a bronze color covered with walnut canaletto wood. The padding is in flexible multi-density polyurethane and is covered with removable fabric or leather, with a leather piping available in various color shades.”
A series of armchairs and wing chairs. The structure of the base is in walnut canaletto wood. The padding of the seat and back, in birch plywood and profiled steel, is in flexible multi-density polyurethane covered in fibre. The saddle leather upholstery is completely removable. For code 62910 a seat cushion with fabric or leather upholstery is foreseen, while the wing chairs 62930 and 62940 are provided with a headrest in saddle leather. Stool with frame in multi-layer poplar wood and the feet in solid walnut canaletto wood. The padding in flexible multi-density polyurethane is covered with removable saddle leather.
Grand Tour Chair
Folding chair in solid walnut canaletto wood and metal parts in a bronze colour. It is available with seat and armrest upholstery, or with just the seat cushion. The upholstery in fabric or leather is completely removable and detachable, and the padding is in expanded polyurethane.
Chair and small armchair in solid beech wood and multi-layer, set up without glue and completely disassembling. It is available in natural (fin.30), polished (fin.91) or multicolour version.
A version with padded seat, with not removable fabric or leather upholstery, is also available.
Armchair with back structure in profiled steel, seat in Polimex (composite polyester/polyurethane material) and armrest in solid walnut canaletto wood. The padding is in expanded flexible cold foamed polyurethane. It is available in two versions: executive wing chair or guest armchair. Both have a 5 point revolving base with rotating castors and gas spring for height regulation and a fixed and tilt mechanism. The castors, the base and the connecting structure with the seat are painted in a bronze colour with natural effect. The upholstery, which is not removable, is available in saddle leather.
Armchair with structure in Polimex (composite polyester/polyurethane material)
and the padding is in flexible multi-density expanded polyurethane, covered
with fibre. The not removable upholstery is available:
- in fabric or leather in one colour or with the external and internal parts also in
two different fabrics;
- with the external part in leather and the internal one and the seat cushion in
fabric or leather.
It is available in two versions: low or high back.
The one with low back is available in two measures, and the small one has also
the swivel base. The base is mat lacquered in dark brown colour.
One goose-down cushion is recommended for the small version and four for
the big one.
The armchair with the high back is available with fixed or swivel seat.
To complete the item, it is necessary to buy two goose-down cushions cm 42x42.